Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Get Advance Mass properties

Status
Not open for further replies.
santoshr0114

santoshr0114

Mechanical
Joined
Jul 25, 2015
Messages
2
Location
IN
Hi,

I am currently using the UF_WEIGHT_estab_part_props to get the Center of Mass and Moments of inertia for assemblies. This API is returning me the values based on absolute co-ordinate system.
The menu command in NX (Analysis->Advanced Mass Properties->Advanced Weight Management) gives the results based on the currently used WCS.

I also need to get the results based on the the WCS using a API.
Any suggestions would be helpful.

Regards,
Santosh
 
Status
Not open for further replies.

Similar threads

Christian_RR
  • Locked
  • Question Question
Exporting ANT and Mass Properties
Replies
4
Views
618
Christian_RR
Christian_RR
CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N
W
  • Locked
  • Question Question
how to get graphics window coordinate?
Replies
0
Views
1K
wang.wei
W
orlandoa11
  • Locked
  • Question Question
NX point coordinates as properties
Replies
0
Views
372
orlandoa11
orlandoa11
PSI-CAD
  • Locked
  • Question Question
Easy way to get file location
Replies
4
Views
673
PSI-CAD
PSI-CAD

Part and Inventory Search

Sponsor

Back
Top