Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Geometric Non Linear analysis help

Status
Not open for further replies.

Bharathsf

Aerospace
Feb 5, 2012
35
Hi,
How to define the TABLES1 entry for elasto-plastic analysis of a steel component?
If possible can anybody please provide me with the x and y co-ordinate values for the same?

Thanks

Bharat
 
Replies continue below

Recommended for you

Dear Bharat,
This is an automated job done by the pre-processor, you need to know in advanced the values stress-strain points, then simply define a function and use it in the nonlinear behaviour of material, for instance here you are the nastran output I got using FEMAP & NX NASTRAN (SOL106) basic nonlinear analysis:

INIT MASTER(S)
NASTRAN SYSTEM(442)=-1, SYSTEM(319)=1
ID Femap,Femap
SOL NLSTATIC
TIME 10000
CEND
TITLE = NX Nastran NL Static Analysis Set
ECHO = NONE
DISPLACEMENT(PLOT) = ALL
SPCFORCE(PLOT) = ALL
FORCE(PLOT,CORNER) = ALL
NLSTRESS(PLOT) = ALL
STRESS(PLOT,CORNER) = ALL
BEGIN BULK
$ ***************************************************************************
$ Written by : Femap with NX Nastran
$ Version : 10.3.1
$ Translator : NX Nastran
$ From Model :
$ Date : Thu Mar 08 11:47:25 2012
$ Output To : D:\Scratch
$ ***************************************************************************
$
PARAM,LGDISP,1
PARAM,POST,-1
PARAM,OGEOM,NO
PARAM,AUTOSPC,YES
PARAM,K6ROT,100.
PARAM,GRDPNT,0
CORD2C 1 0 0. 0. 0. 0. 0. 1.+FEMAPC1
+FEMAPC1 1. 0. 1.
CORD2S 2 0 0. 0. 0. 0. 0. 1.+FEMAPC2
+FEMAPC2 1. 0. 1.
$ Femap with NX Nastran Material 1 : Steel-Rolled (MPa)
MATS1 1 1 PLASTIC 1 1 235.
$ Femap with NX Nastran Function 1 : Steel_Rolled Stress-Strain (MPa)
TABLES1 1 +
+ 0. 0. .00114 235. .0296 237. .0392 255.+
+ .0488 270. .0583 283. .0677 295. .077 306.+
+ .0862 315. .0953 323.5 .1044 331.5 .1133 338.5+
+ .1222 343.5 .131 348. .1484 356.5 .157 360.5+
+ .1655 364.2 .174 367.5 .1823 370.5 .2 376.7+
+ .3 406. .4 430. .5 450. .6 468.+
+ .7 483. .8 496. .9 508. 1. 520.+
+ ENDT
MAT1 1 206000.79230.77 .3 7.85-9 1.728-5 0. +
+ 235.
ENDDATA

Best regards,
Blas.

~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director

IBERISA
48011 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor