Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
GEC Electric Motor 256/180
- Thread starter quintain
- Start date
(Cap size in microfarad) = {(ENERGY in joules) / [(0.5) * (Volt) * (Volt)]} * 10^6
For Start Cap, use START ENERGY (Start caps are generally somewhere between 50 and 150 uF)
For Run Cap, use RUN ENERGY (Run caps are generally somewhere between 5 and 100 uF)
Converting energy to motion for more than half a century
For Start Cap, use START ENERGY (Start caps are generally somewhere between 50 and 150 uF)
For Run Cap, use RUN ENERGY (Run caps are generally somewhere between 5 and 100 uF)
Converting energy to motion for more than half a century
Hi,
There is not enough information for an accurate calculation but the estimate can be found here (approximate value of start and run capacitors for single-phase motors, 230 V; 50 Hz) :
[link ] [/url]
There is not enough information for an accurate calculation but the estimate can be found here (approximate value of start and run capacitors for single-phase motors, 230 V; 50 Hz) :
[link ] [/url]
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question