GEC Electric Motor 256/180

[quintain]

Hello,
Can anyone advise where I can find information of a 40 yr ++ motor
I wish minimal information such as Start capacitor size and also Run capacitor size and centrifugal switch diagram and operation.
I attach a pic of the motor information plate.

 

[itsmoked]

Keith Cress
kcress -

http://www.flaminsystems.com

 

[Gr8blu]

(Cap size in microfarad) = {(ENERGY in joules) / [(0.5) * (Volt) * (Volt)]} * 10^6

For Start Cap, use START ENERGY (Start caps are generally somewhere between 50 and 150 uF)
For Run Cap, use RUN ENERGY (Run caps are generally somewhere between 5 and 100 uF)

Converting energy to motion for more than half a century

 

[zlatkodo]

Hi,
There is not enough information for an accurate calculation but the estimate can be found here (approximate value of start and run capacitors for single-phase motors, 230 V; 50 Hz) :
[link

https://winding.wixsite.com/design/for-customers

]

https://winding.wixsite.com/design/for-customers

[/url]

 

[quintain]

Thank you to all for your help.