Jul 14, 2005 #1 mrr1671 Mechanical Oct 18, 2002 20 Does somebody knows how to model or where to find the way to model a gear in Catia. Thanks!
Jul 14, 2005 #2 Configurator New member Sep 11, 2004 152 Circular "Pad" feature. Use the "Pocket" feature to create one tooth. Use the "Circular Pattern" feature on the tooth pocket. Lee http://www.lmco.com Upvote 0 Downvote
Circular "Pad" feature. Use the "Pocket" feature to create one tooth. Use the "Circular Pattern" feature on the tooth pocket. Lee http://www.lmco.com
Jul 14, 2005 #3 Configurator New member Sep 11, 2004 152 There are a bunch of ways to make things in CATIA. Some people might say: make a disk and add teeth to it. That would work too, but I don't like it. I'll often try to model things as they'll be built (though this isn't always best for CATIA). How would I machine a gear? I'd turn a disk, diameter equal to my design tooth diameter, then I'd cut out the teeth. So that's what I'll do in CATIA. Lee http://www.lmco.com Upvote 0 Downvote
There are a bunch of ways to make things in CATIA. Some people might say: make a disk and add teeth to it. That would work too, but I don't like it. I'll often try to model things as they'll be built (though this isn't always best for CATIA). How would I machine a gear? I'd turn a disk, diameter equal to my design tooth diameter, then I'd cut out the teeth. So that's what I'll do in CATIA. Lee http://www.lmco.com
Jul 26, 2005 1 #4 occo Automotive Mar 10, 2004 7 http://www.rcub.bg.ac.yu/~ggajic/pub/catia/gear/SpurGEAR.CATPart Upvote 0 Downvote
Jul 26, 2005 #5 occo Automotive Mar 10, 2004 7 here are step by step instructions http://www.rcub.bg.ac.yu/~ggajic/pub/catia/gear/ Upvote 0 Downvote
Jul 26, 2005 Thread starter #6 mrr1671 Mechanical Oct 18, 2002 20 Thanks to OCCO for the links, this is what I was looking for. Upvote 0 Downvote
![[bandito]](/data/assets/smilies/bandito.gif "[bandito] [bandito]")
![[bigsmile]](/data/assets/smilies/bigsmile.gif "[bigsmile] [bigsmile]")