Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

GD&T symbol size in FCF changes based on font type

Status
Not open for further replies.
electracomplex

electracomplex

Automotive
Joined
Jan 17, 2014
Messages
42
Location
US
Hi y'all,

I'm having an intermittent issue where sometimes the GD&T symbols in the FCF's I create are sized correctly with the tolerance font and sometimes they're very small. If I change to certain fonts (Leroy is one) they appear correct. The default Arial Unicode MS doesn't.

And it's not every symbol. Flatness, parallel, perpendicularity, and straightness appear correct.

Any idea what the root cause might be?

Thanks!





~Felicia H.
NX 8.5
 
 http://i.imgur.com/QM5O3qy.png
Status
Not open for further replies.

Similar threads

hmichel
  • Question Question
NX2312 Sketcher and Drafting - Approximate Dimension Symbol
Replies
7
Views
4K
SDETERS
SDETERS
I
  • Locked
  • Question Question
Block UI Styler apply changes
Replies
0
Views
1K
issamo
I
John-FR
  • Locked
  • Question Question
Question: How to make a vector based PDF
Replies
1
Views
1K
cowski
cowski
shightower
  • Locked
  • Question Question
Countersink on both sides of hole in NX?
Replies
3
Views
2K
Bleaker
Bleaker
skibum13
  • Locked
  • Question Question
NX12 Color Palette Size Issue
Replies
2
Views
696
skibum13
skibum13

Part and Inventory Search

Sponsor

Back
Top