Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
gas tips clogging problem
- Thread starter pekos
- Start date
Do you know what is clogging the tips? Traces of liquids in fuel gas can coke in burner tips. If that was the cause, strainers aren't going to help.
Strainers would only solve the problem if the strainers opening is smaller than the solids that are plugging your tips.
Strainers would only solve the problem if the strainers opening is smaller than the solids that are plugging your tips.
- Thread starter
- #3
thank u 4 replying TD2K
actually I dont know what ' s clogging in gas tips, maybe with further investigation I will know
cant strainer catch traces of liquids, it must be some type of strainer that does the job, no??
I think that part of the problem is deposit in the feed branches pipes, so am looking for solutions to clean them whenever un overhaul is planned.
but you are right process is to be considered to solve the problem, I theink i have to go through analysing some samples...
actually I dont know what ' s clogging in gas tips, maybe with further investigation I will know
cant strainer catch traces of liquids, it must be some type of strainer that does the job, no??
I think that part of the problem is deposit in the feed branches pipes, so am looking for solutions to clean them whenever un overhaul is planned.
but you are right process is to be considered to solve the problem, I theink i have to go through analysing some samples...
- Status
Similar threads
- Locked
- Question
- Locked
- Question