Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gas emission

Status
Not open for further replies.
BZLAM21

BZLAM21

Petroleum
Joined
Aug 12, 2020
Messages
61
Location
IT
Hi
Please could an expert explain why we should specify the reference O2 dry condition to apply the flue gas emission limits at GTG stack and boiler stack.
Best reagards.
 
Sort by date Sort by votes
Because in future flue gas will be tested at dry conditions. See applicable local methods of manual sampling and measuring.
 
Upvote 0 Downvote
Because it will standardize the values.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Jacky23
  • Locked
  • Question Question
Who can design a connection for gas
Replies
3
Views
893
LittleInch
LittleInch
Lowrentstuff
  • Locked
  • Question Question
Increasing Raw Natural Gas Dew Point and Molar Flow Rates
Replies
10
Views
2K
MortenA
MortenA
Jone k
  • Locked
  • Question Question
Fired heaters temperature controller with fuel gas controllers
Replies
9
Views
756
georgeverghese
georgeverghese
chillwin
  • Locked
  • Question Question
Natural Gas and liquid dropout.
Replies
5
Views
1K
LittleInch
LittleInch
balaji28
  • Locked
  • Question Question
Ash removal from shale oil ( heavy fuel oil + gasoline mixture)
Replies
6
Views
714
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top