GAS Threads 1

[cubalibre000]

Hi,
I need to make a BSP external thread.
I add this at the end of the thd_metric.dat under C:\Programmi\UGS\NX 7.0\UGII, but I don't see this thread.

GAS,0

# Filettature gas compilate da tabella UNI 339-66 4ed. con lunghezza standard BIMAL
# ----------------------------------------------------------------------------
# Name Major Minor Pitch Tap Drill Shaft Depth
# Dia. Dia. Dia. Dia.
# (internal (external (75% full
# threads) threads) thread)
# (mm) (mm) (mm) (mm) (mm) (mm)
# ----------------------------------------------------------------------------

1/8-GAS 9.728 8.566 0.907 8.700 9.600 11.000
1/4-GAS 13.157 11.445 1.337 12.000 13.000 12.000
3/8-GAS 16.662 14.950 1.337 15.500 16.400 14.000
1/2-GAS 20.995 18.631 1.814 19.000 20.700 16.000
3/4-GAS 26.441 24.117 1.814 24.500 26.100 17.000
1-GAS 33.249 30.291 2.309 30.500 33.000 21.000
1_1/4-GAS 41.910 38.952 2.309 39.500 41.600 23.000
1_1/2-GAS 47.803 44.845 2.309 45.000 47.500 25.000
2-GAS 59.614 56.656 2.309 57.000 59.000 26.000
2_1/2-GAS 75.184 72.226 2.309 72.500 75.000 30.000
3-GAS 87.884 84.926 2.309 85.000 88.000 35.000
3_1/2-GAS 100.330 97.372 2.309 97.500 100.500 40.000
4-GAS 113.030 110.072 2.309 110.500 113.500 44.000
5-GAS 138.430 135.472 2.309 135.500 138.500 52.000
6-GAS 163.830 160.872 2.309 161.000 164.000 58.000

Thank you...

Using NX 7.0.1.7 MP3 and TC8.1

 

[JohnRBaker]

First, are these 'tapered' threads? If so, you have to indicate that by using the name 'GAS,1'. As for getting them to appear in the list of available Symbolic Treads, you need to go to...

Customer Defaults -> Modeling -> Feature Settings -> Symbolic Threads

...and add 'GAS' to the list of threads in the section of the dialog titled 'Form'.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[cubalibre000]

Thank you John.

Thank you...

Using NX 7.0.1.7 MP3 and TC8.1