Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Galvanized Steels Vs Stainless Steel

Status
Not open for further replies.

ENPMAT

Materials
Jun 27, 2012
9
Dear All,
I know that SS are better than HDG Steels.
But when we HDG steels can be used instead of SS, and when this substitution is no acceptable.
Is there any standard or common practice specially in oil and gas industry.
Thanks.
 
Replies continue below

Recommended for you

Not true at all. Stainless Steels are different. 304 is worse than HDG in certain offshore platform applications due high propensity to pit.
 
One must also consider venting for HDG. If vent holes are unacceptable in a certain application then the use of HDG is not an option.

"Research is what I'm doing when I don't know what I'm doing."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor