Full vacuum design

[Lasuen]

Hi,I'm mecánical engineer at años oil refinery and oír desining specifications shows a 177 grades Celsius as designing temperatura,at least

Why this value?

Thanks

 

[C2it]

Not sure what you are asking here.

Yo could try writing your question in your own language then use Google Translator.

 

[gr2vessels]

Lasuen, if you ask why is this 177 deg C design temperature for full vacuum design pressure, it is most likely a process requirement, perhaps steam cleaning of the vessel or similar. You need to ask the person who wrote the mentioned specification or the process engineer associated with your work.
Cheers,
gr2vessels

 

[Artisi]

Lasuen. If problem with language look at our forum " translation assistance for engineers " post in your first language and someone should respond with assistance or point you in the right direction.

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)

 

[DRWeig]

¿Espanol?

Lasuen, si necesitas más información, asistencia de traducción para este foro está aquí:

Translation Assistance for Engineers

Best to you,

Goober Dave

Haven't see the forum policies? Do so now: Forum Policies