Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fuel Gas Knockout Pot 2

Status
Not open for further replies.

mcinco50

Mechanical
Joined
Dec 13, 2006
Messages
16
Location
US
I'm doin an Engineering Work Order, and I'm replacing a Fuel Knockout Pot. Can somebody recommend a manufacturer for a Fuel Gas Knockout Pot.
 
Before you order, you need to know what to do if the fuel KO drum gets liquids in it. Does it have a level controller or sight gauge? Does it have a switch? Some fuel KO have a ball float system where there is a ball in a cage attached to the outlet nozzel on the top of the KO. If liquids enter the ball floats up and shuts off the fuel. A lot of time the KO has a filter in it to remove even the smallest droplets or fine particles of rust, dirt and oils.

There are several shops that can help. Here is a nice one that will assist in the engineering too.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top