Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Freebody display in FEMAP

Status
Not open for further replies.
ThomasH

ThomasH

Structural
Joined
Feb 6, 2003
Messages
1,199
Location
SE
Hi all

I'm am working on a model i FEMAP and have choosen to show the reactions with the freebody capability. However, I minor glitch is annoying for the moment. I want to show the numbers with less digits and can't find any way to do this.

(Instead of reaction 157.12 I want the display to read 157.)

I have tried the view-options-criteria with no luck.

Any help is appreciated.

Thomas H
 
Status
Not open for further replies.

Similar threads

EKCP
  • Question Question
TABLES1 limited number of stress/strain entries for SOL 401 Using FEMAP 24.06
Replies
6
Views
15K
rb1957
rb1957
Salvenheit01
  • Locked
  • Question Question
FEMAP: Create CFAST at multiple points
Replies
0
Views
987
Salvenheit01
Salvenheit01
Dasher99
  • Locked
  • Question Question
FEMAP Fastener Modeling
Replies
4
Views
1K
BlasMolero
BlasMolero
sivasooriyan
Reg. property groups in Autodesk Nastran
Replies
1
Views
8K
IRstuff
IRstuff
sivasooriyan
  • Question Question
Reg. property groups in Autodesk Nastran
Replies
0
Views
8K
sivasooriyan
sivasooriyan

Part and Inventory Search

Sponsor

Back
Top