abdo almeskawi
Mechanical
i have a problem with tha pump the pump dont have oil leak and the constant level oil empty added oil many times shown that over flow on pump
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
flowserve pump madel HPX11A overflow lubricating il
- Thread starter abdo almeskawi
- Start date
- Status
The oil cannot disappear, must have a leak somewhere.
It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
LittleInch
Petroleum
The pump doesn't have an External leak. This means your leak is internal.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Seems it's a standard bearing frame arrangement with bearing and seal each end open to atmosphere - any leak should be obvious
It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
LittleInch
Petroleum
Abdo. You need to help us here and provide photo, sectional drawing etc.
You need to do the heavy lifting to give us the information on this particular pump.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
You need to do the heavy lifting to give us the information on this particular pump.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Question