May 18, 2015 #1 ChihebG Petroleum Joined Mar 3, 2015 Messages 61 Location TN How to permorm a Flare network sizing using Hysys and flarenet ?
May 18, 2015 #2 MortenA Chemical Joined Aug 20, 2001 Messages 2,998 Location DK Try and try again Upvote 0 Downvote
May 18, 2015 #3 EmmanuelTop Chemical Joined Sep 28, 2006 Messages 1,237 Location RS Set the flows. Set the design criteria. Then run. Fix the errors, then run again. In addition to this simple advice, there is a bunch of guides and manuals in the software itself. Dejan IVANOVIC Process Engineer, MSChE Upvote 0 Downvote
Set the flows. Set the design criteria. Then run. Fix the errors, then run again. In addition to this simple advice, there is a bunch of guides and manuals in the software itself. Dejan IVANOVIC Process Engineer, MSChE