Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
fixex axes in matlab gui
- Thread starter alexrait1
- Start date
The appropriate axis properties are 'XLimMode', 'YLimMode' and 'ZLimMode' which should all be set to 'manual'.
After you have done that, you can set the axis limits using the 'XLim', 'YLim' and 'ZLim' axis properties which are in the 2 element vector form [min, max]
M
--
Dr Michael F Platten
After you have done that, you can set the axis limits using the 'XLim', 'YLim' and 'ZLim' axis properties which are in the 2 element vector form [min, max]
M
--
Dr Michael F Platten
- Status
