Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Filter application in draft

Status
Not open for further replies.
VicUser

VicUser

Mechanical
Joined
Dec 9, 2003
Messages
4
Location
US
How can I apply filter settings (SmartSelect) to a windowed selection set only as opposed to automatically applying to the entire document? This has specific benefit when cleaning up our translated/migrated legacy data into SE.
 
Status
Not open for further replies.

Similar threads

NirVidP
  • Locked
  • Question Question
How to 'Create Part In Place' using vba?
Replies
0
Views
967
NirVidP
NirVidP
NZMark
  • Locked
  • Question Question
Dimension scaling of drawing objects in Draft
Replies
3
Views
2K
kjoiner
kjoiner
Vikas4auto2019
  • Locked
  • Question Question
How to add bulk components in to the assembly.
Replies
0
Views
926
Vikas4auto2019
Vikas4auto2019
John_W2
  • Locked
  • News News
Parametric patterns in drawings
Replies
0
Views
870
John_W2
John_W2
John_W2
  • Locked
  • Question Question
Combining model dimensions in drawings
Replies
0
Views
938
John_W2
John_W2

Part and Inventory Search

Sponsor

Back
Top