Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Feature Control Frame - Stacking 1

Status
Not open for further replies.
phillpd

phillpd

Mechanical
Joined
Oct 19, 2006
Messages
780
Location
GB
In the attached image, I want the "Flatness" to be above "Total Runout", but I want to keep the extension line at the bottom of the "Total Runout".

Is it possible ?

NX 9.0.3.4
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)
 
 http://files.engineering.com/getfile.aspx?folder=87f51d86-323e-4a37-b4db-8c05fb7e2029&file=2015-03-04_13-11-47.png
Status
Not open for further replies.

Similar threads

MANox
  • Locked
  • Question Question
NXJournal-select feature on drawing (filtr)
Replies
0
Views
1K
MANox
MANox
E
  • Question Question
Seeing individual elements of an instantiated Feature Template? (Part Navigator)
Replies
1
Views
4K
cowski
cowski
CAD2015
  • Locked
  • Question Question
Feature Recognition......................
Replies
7
Views
802
Toost
Toost
niedzviedz
  • Locked
  • Question Question
AskSymbThreadParms - unknow feature type
Replies
3
Views
393
niedzviedz
niedzviedz
Proizvodnja
  • Locked
  • Question Question
Pattern Feature
Replies
0
Views
268
Proizvodnja
Proizvodnja

Part and Inventory Search

Sponsor

Back
Top