Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fatigue Properties of 410SS Welded in the Hardened Condition

Status
Not open for further replies.
gwnorth

gwnorth

Aerospace
Joined
Jun 7, 2004
Messages
2
Location
CA
I am interested in any fatigue test results for 410SS sheet TIG welded in the hardened and tempered condition (RC 26-32)and tempered at 1025F after welding. Significant delta ferrite is present in the HAZ.
 
Status
Not open for further replies.

Similar threads

RAJMETALLURGY
  • Question Question
Mechanical properties in heavy thick test coupons.....
Replies
1
Views
3K
r6155
r6155
V
  • Question Question
Determining the Fracture Mode: Brittle Fracture vs. Fatigue in a Pump Shaft
2
Replies
21
Views
21K
mfgenggear
mfgenggear
PRjuventus
  • Locked
  • Question Question
Interpreting of "thickness is the minimum dimension of the heaviest section"
Replies
0
Views
1K
PRjuventus
PRjuventus
A
  • Question Question
Measurement of gamma prime in superalloys.
Replies
2
Views
8K
absaul02
A
Sparky4598
  • Locked
  • Question Question
Fatigue damage and heat treatment
Replies
8
Views
2K
MFAMET
MFAMET

Part and Inventory Search

Sponsor

Back
Top