Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fatal Error 316(IFPDRV) and 9002 (IFPS) 1

Status
Not open for further replies.

AndreaGr

Mechanical
Joined
Feb 4, 2015
Messages
2
Location
IT
Hello everybody,
i have to analyze an indentation test. So i implemented a contact problem between an elastic element and a plastic element.
I used the axisymmetric property, but i'm working on Femap 11.1 and I thought it would be fine.
Analysis reports two fatal erros:
Fatal Error 316(IFPDRV) and 9002 (IFPS).
316's window says :" ILLEGAL DATA ON BULK DATA ENTRY TABLED2
if you are using the large field format make sure the number of entries is even."

I know this error is usually the result of incorrectly defining a material or element property, but i checked.

could you please help me to solve these fatal errors?

Thanks and sorry for my english.
 
Dear Andrea,
Revise the function table in FEMAP, in the past I remember to have the typical error after clicking OK in the table: the last line was repeated twice!!. And NX NASTRAN don´t like it at all ...
Best regards,
Blas.

~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director

IBERISA
48004 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
 
Thanks for the prompt response!
Do you mean function for Nonlinear material? Sadly i have checked and it's fine. Additionally, i ran analysis with materials from Femap library.
I think problem comes from the connection properties or some kind of analysis' settings, but i don't know.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top