Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fastener connection

Status
Not open for further replies.
proEuser17

proEuser17

Mechanical
Joined
Jan 27, 2009
Messages
1
Location
CA
Hi, Mates

I'm new for the mechanica so far, I'm using the Fastener connection, by the basic feature, we dont have the advanced license. i got the question about the pre load, in the real life the friction will stop the lug moving, so i dont know how well is the fastener connection defined under Mechanica, is there any preload applied based on the bolt size,?? should i apply by myself, and add on the friction as well??

thanks for taking look
 
Status
Not open for further replies.

Similar threads

T
Slot-follower connection analysis
Replies
0
Views
7K
thanhhungone
T
M
Rotational connection
Replies
0
Views
4K
mikechy
M
mikechy
  • Locked
  • Question Question
Rotational connection
Replies
0
Views
176
mikechy
mikechy
P
Connection condition setup issues (Can't succeed the joints constrain condtion)
Replies
0
Views
5K
pubojeff
P
S
Best method to model fastener
Replies
4
Views
15K
acad
A

Part and Inventory Search

Sponsor

Back
Top