hi,by wrong cable connected to communication port rs 232 we lost communication.There are to available ports on main fanuc 18 ta panel. We tried to use the second one by changing channel number I/O to 2 par 20 with no luck. Also we didn't noticed any output signals.Is any other parameters we suppose to chaged? Is it possible that interface module is defective? thanks for help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
fanuc 18 ta communication problem
- Thread starter jeeprump
- Start date
