Family table

[jackdog6]

I have a family table with 5 columns. All the columns are set at 2 decimals places (5.00). I would like to change the first column to only show one (5.0). When I change the first (cell) column, the remainig four columns also change. I would enter the note properties menu and change the value to 1. But the remaining seem to be locked. I also tried to change the value on the genric part (which worked) then updated the table with no change. Thanks for any help.

 

[jsantangelo]

Have you changed the "Number of decimal places" for the desired dimension in the model?

View attachment 5632

 

[jackdog6]

Thanks James, yes I tried that but it seems to change all the columns. We just changed the table to 2D since we were in a hurry.


By the way, can I ask what company you work for? I work in the same field.

 

[srieger]

No way to change the display in the actual family table. You can change it in the report table though. Just as you would in a note.

 

[ssa1]

i've tried as james suggested and it works. i'm using wildfire 5





2012-05-04_034544_table.rar