Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Extracting Points for Standard Deviation
- Thread starter JPM73
- Start date
Michael711
Automotive
you can use Analysis |Deviation|Gauge,checking to validate it.It'll helpfull.
- Thread starter
- #3
Hi,
This is in refererenc to my orginal, "Extracting Points for Standard Deviation" posting.
I uploaded a MS Word file with a handful of pics to better explain on what I'm trying to accomplish.
As you should see from the pictures, there's a handful points that should be along the face of the profile that it outlines.
I'm trying to determine if each of these points are actualy on the face & if the are not, what distance does it deviate from it.
With collected data, I will probably calculate the standard deviation.
Please suggest methods to produce accurate results.
Thanks
QuEST / GE Mechanical Designer
This is in refererenc to my orginal, "Extracting Points for Standard Deviation" posting.
I uploaded a MS Word file with a handful of pics to better explain on what I'm trying to accomplish.
As you should see from the pictures, there's a handful points that should be along the face of the profile that it outlines.
I'm trying to determine if each of these points are actualy on the face & if the are not, what distance does it deviate from it.
With collected data, I will probably calculate the standard deviation.
Please suggest methods to produce accurate results.
Thanks
QuEST / GE Mechanical Designer
- Status
Similar threads
