Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ext. circlip gaps

Status
Not open for further replies.
kges

kges

Mechanical
Joined
May 24, 2002
Messages
5
Location
IE
Does any one know how to calculate the unstessed gap in an extrnal circlip D1460/AS heavy duty? "known as E-value" I have very good info from But I can only guess it as the outer circle wall thickness varies.

Regards
Kevin
 
Status
Not open for further replies.

Similar threads

KVARM
  • Locked
  • Question Question
Aluminium Honeycomb Panel with Aluminium Extrusion Welding
Replies
4
Views
2K
kingnero
kingnero
D
  • Locked
  • Question Question
steel weld filler and process with extremely machinability
Replies
2
Views
2K
dtimberlake
D
Y
  • Locked
  • Question Question
A extremely thin layer of adhesive between two steel plate with the pressure by Abaqus
Replies
0
Views
956
Yao Lingbo
Y
fugeeo
  • Locked
  • Question Question
Long-Term Durability of Epoxy Anchor in Exterior Salt Air Environment
Replies
2
Views
295
hokie66
hokie66
Kristina Sornikova
  • Locked
  • Question Question
Bolt preload and externally applied tension load
Replies
7
Views
1K
Kristina Sornikova
Kristina Sornikova

Part and Inventory Search

Sponsor

Back
Top