Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Export BOM with model in UGNX 7.5

Status
Not open for further replies.
dallas2000

dallas2000

Mechanical
Joined
Apr 23, 2012
Messages
7
Location
US
Is there any way to export a UGNX 7.5 model file to STL or IGES with the item callouts as found in the BOM? Any suggestions would help.
 
Sort by date Sort by votes
Iges should support both partslist and balloons since Iges supports drawings.
STL was originally meant to be used for Stereo Lithography machines. ( i.e "3D printers" ) I would be surprised if there was support for Partslists.

Regards
Tomas
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kenja824
  • Question Question
Model Items Selectable in Drafting View?
Replies
5
Views
644
Kenja824
Kenja824
A
  • Locked
  • Question Question
Filling Internal Volume Of Part With No Model History
Replies
5
Views
4K
cowski
cowski
gurucallie
  • Locked
  • Question Question
Embed an EXcel file into NX 2027 so the file drives a model and stays with the model file
Replies
3
Views
3K
cowski
cowski
N
  • Locked
  • Question Question
Export attributes of items contained in a folder structure in Teamcenter
Replies
2
Views
4K
Rob_N
Rob_N
Carbonated
  • Question Question
Distance constraint incompatible with cylindrical
Replies
2
Views
5K
Carbonated
Carbonated

Part and Inventory Search

Sponsor

Back
Top