Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Etabs steel frame design check error

Status
Not open for further replies.
hadiENG201

hadiENG201

Civil/Environmental
Joined
Sep 2, 2021
Messages
5
Location
DE
Hello
I have an steel frame model, the problem is when I analysed the model and want to start steel fram design check , Etabs shows this error ( in the picture ).

I checked the equation of the sections and there was no problem.
ETABS version 18.1.0
 
 https://files.engineering.com/getfile.aspx?folder=6b610b77-b1d6-4a0a-9ed9-1db8e1151910&file=20210911_184912.jpg
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
Composite column definition error in ETABS
Replies
0
Views
1K
member 1218881
M
O
  • Question Question
Cold Form Shear Walls in ETABS
Replies
0
Views
3K
olipax
O
Stockton2008
  • Locked
  • Question Question
How to set displacement ratio (storey drift ratio) check in Etabs
Replies
0
Views
1K
Stockton2008
Stockton2008
Catherine S
  • Locked
  • Question Question
Etabs 'STURM-SEQUENCE CHECK FOUND 2 EIGENVALUE(S) BELOW THE SHIFT'
Replies
1
Views
2K
JoshPlumSE
JoshPlumSE
Johnamaro
  • Locked
  • Question Question
Auto Wind - ETABS
Replies
0
Views
1K
Johnamaro
Johnamaro

Part and Inventory Search

Sponsor

Back
Top