Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ETABS 2013 - Display Mode Shape
- Thread starter redsun87
- Start date
I had the same problem and contacted CSI after spending more time looking than I would like to admit. It is in the deflected shape dialog box. I am not at work, but if you click on the deflected shape icon, you should be see a check box or something for the mode shape.
- Status
Similar threads
- Locked
- Question
- Question