Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error in Etabs while export and import

Status
Not open for further replies.
Ali Abidi

Ali Abidi

Structural
Joined
Jul 2, 2017
Messages
4
Location
IN
Dear All,

I m working on a low rise residential building and designing in Etabs. When I export and import in e2k file, Reinforcement in column only exceeds about 3 times without any changing in Etabs model. Can anyone explain or check attached Etabs file.

your immediate feedback regarding to the matter subjected will highly be appreciated .
Thanks in Advance

Regard's
Ali
 
 https://files.engineering.com/getfile.aspx?folder=33843614-1321-4967-bbbf-68e22ab44fbc&file=result.pdf
Status
Not open for further replies.

Similar threads

O
  • Question Question
Cold Form Shear Walls in ETABS
Replies
0
Views
5K
olipax
O
M
  • Locked
  • Question Question
Composite column definition error in ETABS
Replies
0
Views
1K
member 1218881
M
Tygra_1983
  • Locked
  • Question Question
Natural Frequencies in ETABS
Replies
5
Views
2K
GregLocock
GregLocock
GJoeRMK
  • Question Question
Modeling question in etabs, What Etabs does to a shell element to make it "ribbed" ?
Replies
2
Views
15K
JoshPlumSE
JoshPlumSE
Stockton2008
  • Locked
  • Question Question
How to define ultimate and service load combos in Etabs
Replies
1
Views
2K
Luceid
Luceid

Part and Inventory Search

Sponsor

Back
Top