Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EQUIVALENT TO ASTM E375

Status
Not open for further replies.
AEC2012

AEC2012

Mechanical
Jul 20, 2004
7
Does anyone know an equivalent material for ASTM E375
 
Replies continue below

Recommended for you

Sort by date Sort by votes
You must have the wrong number, because E 375 is a withdrawn standard that covered terminology of resinography.

Regards,

Cory

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Upvote 0 Downvote
Thanks for the answer. My problem is the drawing I am using for Reference calls for astm e375. Thanks, B
 
Upvote 0 Downvote
I suspect that the drawing should have stated ASTM A 375 Specification for High-Strength Low-Alloy Hot-Rolled Steel Sheets and Strip, which was Withdrawn and Replaced by ASTM A 606 in 1971.

Regards,

Cory

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

N
  • Question
ASTM A249 304L Square Tubing
Replies
5
Views
3K
mfgenggear
mfgenggear
MicroEng
  • Question
ASTM A 350 manufacturing
Replies
5
Views
3K
mfgenggear
mfgenggear
Saad M.M.
  • Locked
  • Question
Is ASTM A262, Practice E sufficient to ensure solution annealing of 316L stainless steel?
Replies
5
Views
3K
SK METT
SK METT
Abu Bakar
  • Locked
  • Question
Material Equivalent to ZG20SiMn
Replies
3
Views
370
Gavinluoy
Gavinluoy
A M Contractor
  • Locked
  • Question
Tensile failure observed in Cast ASTM A494 Gr. CU5MCuC
Replies
9
Views
4K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom