Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Equipment with AC 230 V & DC 48 V DC

Status
Not open for further replies.
EngineerAdi

EngineerAdi

Electrical
Joined
Mar 19, 2010
Messages
3
Location
AL
I heard about equipment with input AC 230 V and 48 V DV, and there is no switch to change the output form AC to DC.
i am interested how do they work?
thank you for your opinion.


 
Status
Not open for further replies.

Similar threads

AG-PPI
  • Locked
  • Question Question
Small AC-DC bridge popping
Replies
5
Views
2K
AG-PPI
AG-PPI
CLos
  • Locked
  • Question Question
Capacitor Selection for DC to DC converter
Replies
0
Views
1K
CLos
CLos
S
  • Question Question
Can I apply a continuous 9V DC power supply to a 24V DC DIOD OR-ing unit to power up a 9V DC media converter?
Replies
0
Views
3K
suresh448online
S
Rodmcm
  • Question Question
60Vdc to 42V DC at 10A
Replies
1
Views
2K
IRstuff
IRstuff
AnIlin
  • Question Question
Current transformer with air gap for power supply
Replies
2
Views
3K
AnIlin
AnIlin

Part and Inventory Search

Sponsor

Back
Top