proengineer
Mechanical
Dear friends,
While modelling the helical gear with a true involute, I was struck at a point where I need Pro/E to calculate the value of PHI from the following equation:
x=tan(phi)-phi
where x is known to me.
Any suggestions. Amish Bhushan Goel
Engineer
Hitech e Soft
amg@hitechesoft.com
While modelling the helical gear with a true involute, I was struck at a point where I need Pro/E to calculate the value of PHI from the following equation:
x=tan(phi)-phi
where x is known to me.
Any suggestions. Amish Bhushan Goel
Engineer
Hitech e Soft
amg@hitechesoft.com