SteveyB
Petroleum
- Nov 27, 2011
- 47
Hi All,
I was wondering if anyone could help. Basically I am after some material data of EPDM rubber (70 shore) to enter into a FEA model of a seal in Ansys. The analysis is a 3d analysis and therefore requires bi-axial and uni-axial stress strain data. I was wondering if anyone had access or knows where I might obtain such information. I relise the data might not be totally represenative of the real material, as there are too many factors involved. This would just give me a good base to start from until I can obtain the true data.
If anyone could help it would be grately appreciated.
Thanks
I was wondering if anyone could help. Basically I am after some material data of EPDM rubber (70 shore) to enter into a FEA model of a seal in Ansys. The analysis is a 3d analysis and therefore requires bi-axial and uni-axial stress strain data. I was wondering if anyone had access or knows where I might obtain such information. I relise the data might not be totally represenative of the real material, as there are too many factors involved. This would just give me a good base to start from until I can obtain the true data.
If anyone could help it would be grately appreciated.
Thanks