Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Entering Acoustic impedance in ANSYS!!

Status
Not open for further replies.
saurabhsuresh

saurabhsuresh

Mechanical
Joined
Apr 15, 2010
Messages
17
Location
US
Hi,
I needed help regarding where and how I could enter the acoustic impedance (density x speed) for a material in ANSYS.
I know there is a tab under Appply loads>Fluids>impedance.....But if if I am not mistaken, the value to be entered there is between 0 and 1.
So can anyone tell me if I have the values of density x speed (which is usually not between 0 and 1) where would I enter this??

Thanks
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
766
struclearner
struclearner
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
813
Rabea-19
R

Part and Inventory Search

Sponsor

Back
Top