I am looking into engineering the structural laminates of some underground fibreglass storage tanks and I need some advice on the code UL 1316.
Does this code set out calculations to determine the laminate thickness of the tank similar to ASME RTP-1 does for above ground tanks?
If not can someone give me a brief synopsis of what the standard does specify?
I am only after some information or a code that specifies what the laminate thickness and other structural requirements are for an underground fibreglass tank. All the above ground codes, RTP-1, BS4994, BSEN 13121 specifically exclude underground tanks from their scopes.
Any help or advice is much appreciated.
Does this code set out calculations to determine the laminate thickness of the tank similar to ASME RTP-1 does for above ground tanks?
If not can someone give me a brief synopsis of what the standard does specify?
I am only after some information or a code that specifies what the laminate thickness and other structural requirements are for an underground fibreglass tank. All the above ground codes, RTP-1, BS4994, BSEN 13121 specifically exclude underground tanks from their scopes.
Any help or advice is much appreciated.
