Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Enforced piece part

Status
Not open for further replies.
Lars1978

Lars1978

Mechanical
Joined
Dec 30, 2015
Messages
327
Location
NL
What does this mean?
And how can I change it ?

2018-10-31_10_36_50-NX_12_-_Modeling_ulqdjg.png


Lars
NX12.0.2.9 native
Solid Edge ST10
Inventor
 
Sort by date Sort by votes
If you have clumsy colleagues,... You can hinder them from adding components to a part which shouldn't have components. :-)

/ Tomas

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
12K
Toost
Toost
CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
7K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N
E
  • Question Question
Seeing individual elements of an instantiated Feature Template? (Part Navigator)
Replies
1
Views
4K
cowski
cowski
P
  • Locked
  • Question Question
Part Family Siemens NX & TC synchro issue
Replies
1
Views
1K
Piotrek947
P

Part and Inventory Search

Sponsor

Back
Top