Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

End Returns Callout 1

Status
Not open for further replies.

Bagman2524

Structural
Joined
Jul 14, 2005
Messages
707
Location
US
Is there a symbol to callout end returns? Or are end returns called out with a note in the tail?

Faith is taking the first step even when you can't see the whole staircase. -MLK
 
Recently, I have been using a second weld annotation pointing to the return edges, but in the past have called out in the tail as you mention. I don't think it matters as long as they know that they have to precisely provide the return weld, no more, no less.

I also have a general note about not over-welding returns, etc.

"It is imperative Cunth doesn't get his hands on those codes."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top