Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Enclosure Thermal Protection

Status
Not open for further replies.

JLSeagull

Electrical
Joined
Feb 19, 2006
Messages
2,070
Location
US
Occasionally projects require electronic equipment to be installed in environments outside the manufacturers’ specifications. Sometimes these heating / cooling devices require hazardous classifications such as Class I Division 2. A few units are available from a few manufacturers. The last that I used was from Adalet. What are some of the other companies that sell division 2 thermal enclosure protection? I assume the size requirement to be around 300 Btu/h.
 
Vortex tubes I believe can be used in classified environments. They require instrument air of course, but that is often available in those areas anyway.

JRaef.com
"Engineers like to solve problems. If there are no problems handily available, they will create their own problems." Scott Adams
For the best use of Eng-Tips, please click here -> faq731-376
 
Yeah, but air is free isn't it? [wink]

JRaef.com
"Engineers like to solve problems. If there are no problems handily available, they will create their own problems." Scott Adams
For the best use of Eng-Tips, please click here -> faq731-376
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top