Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Embed Anchors 1
- Thread starter kcgriz
- Start date
-
1
- #2
rafamal
Mechanical
- Nov 11, 2002
- 5
Your question is too broad are you looking to bolt your stair to concrete? how big is the stair? what type of importance factor you need to apply(is it a school or an industrial stair)? is it an indoor stair? once you answer this questions and others you can go and check a catalog from Hilti for example and there you will find how to calculate the resistance of a fastener that you choose
Rafael Maldonado
Steel Connection Design
Rafael Maldonado
Steel Connection Design
If you're using an embed plate with headed studs you need to pick a diameter and length and pattern and check it with App. D. You could try using shear friction with debar welded to the plate. I do that when the loads get too high for the App. D calcs.
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
