Email when complete and shutdown?

[GeorgeEllwood]

Hello,
I was wondering if there is a way to get Ansys workbench v13 to email me when a job is complete and then shut down to return the licence?
This is possible in classic Ansys but I haven't found a way to do it in workbench.
I'm using CFX through workbench but would like to be able to use it on any type of project being run through workbench.
Thanks
George

 

[flash3780]

Have you tried "/mail,,yourname@yourdomain.com,jobdone,txt"?

 

[GeorgeEllwood]

Hi Flash3780, I haven't tried your suggestion. Where would I write the text?
Thanks
George

 

[flash3780]

Right click on "Solution" in the model tree, and then click "Insert>Commands".

 

[flash3780]

I didn't mention: The help file says that you have to configure BLAT if you're using Windows. Check the Ansys Command Reference for details:

http://www1.ansys.com/customer/content/documentation/120/ans_cmd.pdf

 

[GeorgeEllwood]

Thanks flash3780, I had to configure BLAT when I wanted Ansys classc to email me from a windows machine. I'm using CFX on a unix machine so it be able to email me.
Cheers
George

 

[flash3780]

Ahh... I blew right past CFX in your original post. That's not really my area of expertise, but I found this script online:
### Send email to user when job ends or aborts.
#PBS -M name@student.unsw.edu.au
#PBS -m abe

http://bluwiki.com/go/CFD_Lab#Example_CFX_Queue_Job_Submission_Script_for_Vayu_.40_NCI

That might do the trick...