Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ELV Lighting in an Machine Shop

Status
Not open for further replies.
Ahr35181

Ahr35181

Electrical
Joined
Sep 8, 2003
Messages
80
Location
GB
Would anyone no of any UK / EC standard which recommends close up machine shop lighting should be ELV rather than LV ?

Thanks in advance

Alan
 
Status
Not open for further replies.

Similar threads

NickParker
  • Locked
  • Question Question
Continuous monitoring of stator insulation when the machine is offline
Replies
9
Views
3K
panter
panter
Shamooooot
  • Locked
  • Question Question
Why not using a Synchronous Machine as a Dynamometer?
2
Replies
31
Views
8K
waross
waross
MitchusMaximus
  • Locked
  • Question Question
Machine Voltage/Phase Mismatch and Retrofit
2
Replies
20
Views
1K
BrianPetersen
BrianPetersen
KHA_LED
  • Locked
  • Question Question
Need help for a THREE-PHASE SYNCHRONOUS MACHINE, 0,3 KW ( model SE2682-3Q)
Replies
5
Views
4K
waross
waross
NickParker
  • Question Question
Tie Breaker in Series and Bus duct
Replies
8
Views
17K
bacon4life
bacon4life

Part and Inventory Search

Sponsor

Back
Top