I am designing a system where an electrical cable comes from a pump inside a pressure boundry area through a 2"-3/4" Hex bushing. I am having trouble finding an electrical connection that meets ASME B31.3 code. Does anybody have any input as to where I might find one and who the manufacturer is? I know that there has to be something somewhere.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Electrical Connection through vessel wall
- Thread starter bassnman
- Start date
Have you tried electrical pass-throughs or do these gadgets
not acceptable by the code you mentioned. We usually used
these gadgets in Autoclaves where pressure can be as high as 500 psi and motor hp as high as 300 hp (1-nozzle per
passthrough).
not acceptable by the code you mentioned. We usually used
these gadgets in Autoclaves where pressure can be as high as 500 psi and motor hp as high as 300 hp (1-nozzle per
passthrough).
Maybe try Conax Fittings?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question