Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Electrical Cable Installation Concern

Status
Not open for further replies.

7JLAman4

Electrical
Nov 28, 2005
48
I have watertight cable types running thru a Quazite box that collects a fair amount of water that reaches above the cables. What electrical issues might/will I have occurring?
 
Replies continue below

Recommended for you

200VDC rated 646kcmil single-conductor EPR/XLPO in one box and LSTSGU 3-conductor, 100VAC 400MCM with Si rubber insulation and XLPO jacket.
 
Sorry that was to be "2000VDC" not 200VDC.
 
if unspliced and submerged there shouldn't be any problem whatsoever.

If splices are submerged they simply need to be properly executed.


Flash

Me wrong? I'm just fine-tuning my sarcasm!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor