Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Edge to Face Contact in Autodesk (NEi) Nastran

Status
Not open for further replies.
TG_eng

TG_eng

Mechanical
Joined
Aug 18, 2017
Messages
83
Location
US
Does anyone know if you can do edge to face or edge to surface contact in NEi Nastran? If you could point me to any material, examples, videos etc that would be greatly appreciated. I see there is a BSSEG in the bulk data cards but the descriptions leads me to think it's only for surface/face regions.

Thanks in advance.
 
Status
Not open for further replies.

Similar threads

joesm519
  • Locked
  • Question Question
Equivalent of "Measures" of Creo Simulate in Autodesk Nastran
Replies
0
Views
796
joesm519
joesm519
cachopan
  • Locked
  • Question Question
Craigth Baptom Superelement op4 Siemens To MSC Nastran
Replies
0
Views
1K
cachopan
cachopan
Stress_Eng
  • Locked
  • Question Question
FEM Contact Analysis Variables
Replies
17
Views
14K
Stress_Eng
Stress_Eng
M
  • Locked
  • Question Question
Use SRS input for Nastran SOL 111
Replies
3
Views
4K
BlasMolero
BlasMolero
N
  • Locked
  • Question Question
MSC NASTRAN for ABAQUS CAE
Replies
4
Views
4K
dmapguru
dmapguru

Part and Inventory Search

Sponsor

Back
Top