Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Craigth Baptom Superelement op4 Siemens To MSC Nastran

Status
Not open for further replies.
cachopan

cachopan

Aerospace
Joined
Oct 18, 2014
Messages
1
Location
AT
Hi Comunity,

I have a customer that uses MSC Nastran, however I have to use Siemens Nastran. The problem is that I create a Superlement in Siemens nastran that is not compatible worh MSN nastran. I use the formatted type for the creation of the op4. Someone knows if should I create the superelement with an specific setup or what can I do to make my superelement compatible with MSC.

Regards
 
Status
Not open for further replies.

Similar threads

N
  • Locked
  • Question Question
MSC NASTRAN for ABAQUS CAE
Replies
4
Views
4K
dmapguru
dmapguru
AACING
  • Locked
  • Question Question
MSC NASTRAN View factor calculation
Replies
0
Views
759
AACING
AACING
F
  • Locked
  • Question Question
Modelling clearance holes MSC Nastran/patran sol 400
Replies
2
Views
2K
SWComposites
SWComposites
AACING
  • Locked
  • Question Question
Methods to add rotation dof to solid with ABAQUS, MSC NASTRAN and SAMCEF
Replies
3
Views
2K
GVDR
G
joesm519
  • Locked
  • Question Question
Equivalent of "Measures" of Creo Simulate in Autodesk Nastran
Replies
0
Views
812
joesm519
joesm519

Part and Inventory Search

Sponsor

Back
Top