Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Duration activity

Status
Not open for further replies.

uoz

Computer
Joined
Nov 28, 2002
Messages
2
Location
IT
I create an activity and set duration to 1 day. I then create a resource and assign it to the activity. When I look at the "Resource usage"-view the work has spread out over two days, with 7 hours on one day and 1 hour the next. If I try to adjust the hours so that all 8 hours are in the same day, that day is marked as overtime and the resource percentage has been adjusted to 114% in the Gant-view. I use a resources pool and the time is set from 8.00 to 12.00 and from 13.30 to 17.30, 8 hours a day. I notice activity starts at 9 and not at 8.

What am I doing wrong?
 
Does your Calendar tab settings in Options for the document match the resource work time settings?

Not sure why they would have been changed, usually all the times are defaulted to be the same.

TTFN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top