Do everyone has any information about drumfilter designing, how to make lip seal rubber between drum and end plate?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
drum filter
- Thread starter oswandi
- Start date
What type of drum are you referring to. I do a lot of work in the asphalt industry and there are seals available working at high temps to seal the rotating drum against the stationary end plates or hoods. Is this what you need? Rod Nissen.
Combustion & Engineering Diagnostics
canded@iprimus.com.au
Combustion & Engineering Diagnostics
canded@iprimus.com.au
wetdustsuppression
Civil/Environmental
The choice of the "gasket" will depend on the material being handled and its temperature;also, how often does the endplate require to be opened,and how quickly does it require to be re-attached?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question