Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Discarding Empty Drums

Status
Not open for further replies.

rexfire

Industrial
Joined
Jul 1, 2011
Messages
10
Location
US
We have drums that are empty. These drums used to have anywhere from latex paint, hydraulic oil, vanishing oil, cleaner/degreaser. We also have some drums that have had hazardous material in it (isocyanate). For the non-hazardous drums do they just need to be empty (less than 1") and take them to a metal scrap facility? Can you do the same with the glue drum or do you need to triple rinse it before discarding?
 
Varies by locality. Better check locally. Call the local dump. if they can't tell you they can refer you.

Thomas J. Walz
Carbide Processors, Inc.

Good engineering starts with a Grainger Catalog.
 
What we did with empty drums whether they contained oils, solvents, asphalted products, etc which we used on bridge construction was to flatten them with a bucket loader and have them removed as scrap metal.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top