Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Drive shaft Paint

Status
Not open for further replies.
Elroyjet

Elroyjet

Automotive
Joined
Sep 8, 2003
Messages
4
Location
US
Hay, I am working on a paint project for steel driveshafts. The question is if the part sees a 300F oven for 17 minutes, and the part temp is data packed at 279F. Then what is the temp that I have to PPAP to?
 
Status
Not open for further replies.

Similar threads

roseda
  • Locked
  • Question Question
Disc deceleration with flexible shaft
Replies
12
Views
1K
roseda
roseda
ksw100
  • Locked
  • Question Question
Assessing Lubrication Adequacy in Cam Shaft and Lifter Design
Replies
2
Views
1K
SwinnyGG
SwinnyGG
sbmar
  • Locked
  • Question Question
Hydraulic Drive vs. Direct drive vs, Diesel Electric Drive -- Overall Efficiency Comparison
Replies
8
Views
2K
Zenithund
Zenithund
pmbrunelle
  • Locked
  • Question Question
Low-throttle driveline oscillations
Replies
19
Views
3K
BrianPetersen
BrianPetersen
shitalyog
  • Locked
  • Question Question
Can we use front drive line with rotating 180 degree at Rear side? What will be impact on mounts?
Replies
7
Views
1K
CWB1
CWB1

Part and Inventory Search

Sponsor

Back
Top