Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

draglink location and affects

Status
Not open for further replies.

kenre

Mechanical
May 23, 2005
300

What sort of pros and cons are there in relocating a draglink forward or rearwards from standard position. This is on a car with steering gear located forward of the axle line?
Standard is with the draglink located behind the outer tierod ends by several inches.
 
Replies continue below

Recommended for you

That'll change your Ackermann, and your toe vs bump curve.

Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor